Product Listings

EXTRACTIVE NET OXYGEN ANALYZER FOR USE IN A WET OR DRY GAS CEM SYSTEM OR INSTRUMENT CABINET

The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system integration.

The LaserGas II Single Path (SP) monitor from NEO Monitors  is a compact, high performance gas monitor for true continuous in-situ monitoring. Based on the well-proven tuneable diode laser (TDLAS)

NEO Monitors new portable analyser is compact, lightweight, and battery powered for HF measurement on the spot (other gases such as HCl, NH3, H2S on request).

Key Features

• Gen. 3 compact LaserGas electronics
• For operation in zone 1 and class I div 1 areas
• Sub second response times
• Low power < 10 Watt
• Suitable for use in SIL 2 systems
• No interference from other gases
• Stable calibration, no zero drift
• No gas sampling: In-situ measurement

The analyzer is specifically configured for monitoring stack emissions on a mass rate basis. It measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions enabling mass emission rates to be reported.

The Model 910 is a version of the Model 920 specifically configured for monitoring stack emissions on a mass rate basis. The standard configuration measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions, enabling mass emission rates to be reported.

The Model 919 is a UV-based photometric analyzer capable of measuring any one of hundreds of UV-absorbing compounds. The 919 is a complete system with a sample extraction and transport system designed to maintain sample integrity.

The Model 920 is a multi-component analyzer capable of measuring up to five different gases simultaneously. It, therefore, performs analyses typically requiring two or more separate analyzers.

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, perating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

Close-coupled extractive design for fast response in flue gases up to 3000°F (1648°C). A thick-film, laser-trimmed combustibles detector provides ±25 ppm combustibles accuracy between 0 to 500 ppm. Recommended for applications with natural gas and light oil as fuel.

Close-coupled convective design for high particulate applications. Suitable for flue gas temperature up to 2800°F (1537°C). Completely field serviceable.

The WDG-IV series analyzers mount directly on the combustion process and are designed for direct measurement in high temperature fl ue gas applications such as fi red heaters and furnaces, but are equally at home on boilers and other lower temperature applications

Close-coupled extractive design for fast response in a wide range of flue gas applications up to 3000°f (1648°c). completely field serviceable.