Product Listings

EXTRACTIVE NET OXYGEN ANALYZER FOR USE IN A WET OR DRY GAS CEM SYSTEM OR INSTRUMENT CABINET

The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system integration.

Versatile pre-combustion or Flue Gas analyser commonly used for spot sampling gas melting tanks, mix station tuning on forehearths, furnace atmosphere control and flame treating applications.

The Thermox PACE2 400 is an easy-to-use industrial-grade combustion efficiency and environmental analyser that calculates the combustion efficiency of furnaces, boilers and other industrial combustion equipment.

The FGA II continuous emissions monitor uses Advanced Dual Sensor Technology (ADST) to measure specific flue gas components.

Advanced Sensor Technology

Recovers from Air to 10 PPM < 1 Hour

Sensitivity 0.05 PPM (50 PPB)

24 Month Expected Life

Excellent Compatibility with CO2

No Maintenance

Stainless Steel Wetted Parts

Designed for Industrial Use

Advanced Sensor Technology

Accuracy < 1% FS Range

Sensitivity < 0.5% FS Range

Fast Recovery to < 1 ppm

24 Month Expected Life

No Maintenance

Intrinsically Safe Design

4 Standard Analysis Ranges

Auto or Manual Ranging

SS Bypass Sample System

Water Resistant Enclosure

ISO 9001:2000 Approved QA System

Two Wire 13-36V DC Loop Power

4-20mA Signal Output

Advanced Galvanic Sensors

0-100 ppm low range

Optional sub-freezing operating ranges

Explosion Proof Enclosure & Gas Ports

Suitable for Class 1, Division 1, Groups B, C, D use

Custom Sample Systems Optional

ISO 9001 Certified

2 Wire Loop Powered O2 Transmitter

Advanced Sensor Technology

Accuracy < 1% FS Range

Sensitivity < 0.5% FS Range

Fast Recovery from Air to 10 ppm

Long Life, No Maintenance

Compatible with 0-100% CO2

4 Analysis Ranges, Auto or Manual

4-20mA Signal Output

Stainless Steel Wetted Parts

Advanced Galvanic Sensor Technology

0-10 ppm FS Low Range

50 ppb Sensitivity Excellent Stability

Digital Electronics & Remote Control

Fast Start SS Bypass Sample System

No Maintenance or Electrolyte Addition

ISO 9001 Approved QA System

Advanced Galvanic Sensor Technology Explosion Proof Integral Sensor

50 ppb Sensitivity

0-10 ppm Full Scale Low Range

Recovers from Air to 10 ppm in 1 hour

24 Month Sensor Life, No Maintenance

Stainless Steel Wetted Parts

12-24 VDC or 100/230 VAC Powered

Intrinsically Safe Oxygen Transmitter

Advanced Sensor Technology

Sensitivity 0.05% (50 PPM)

36 Month Expected Life

Excellent Compatibility with CO2

Auto Ranging

No Maintenance

Designed for Industrial Use

Advanced Sensor Technology

Sensitivity 0.05% (50 PPM)

36 Month Expected Life

Excellent Compatibility with CO2

Auto Ranging

No Maintenance

Designed for Industrial Use

2 Wire Loop Powered O2 Transmitter

Advanced Sensor Technology

Accuracy < 1% FS Range

Sensitivity < 0.5% FS Range

Long Life

No Maintenance

Compatible with 0-100% CO2

4 Analysis Ranges, Auto or Manual

4-20mA Signal Output

Stainless Steel Wetted Parts

XLT-11-24-4 sensor with > 0.5% CO2 present; 24 month sensor life Wall mount NEMA4 and 4X enclosure Temperature controlled heater system for elimination of drift and outdoor use Sample conditioning accessories - contact factory

Advanced Sensor Technology Accuracy < 1%

FS Range Sensitivity < 0.5%

FS Range Fast Response Extended Operating Range

36 Month Expected Life

No Maintenance Compatible in 0-100%

CO2 4 Standard Analysis Ranges

SS Sample System Adjustable HI, LO Alarms Sensor & Power Failure Alarms

Isolated 4-20mA Signal Output Certified ISO 9001 QA System

Accuracy < +1% FS Range

Sensitivity < 0.5% FS Range

Fast Response

Extended Operating Range

36 Month Expected Life

No Maintenance

Compatible in 0-100% CO2

Accuracy < +1% FS Range

Sensitivity < 0.5% FS Range

Fast Response

Extended Operating Temp –20⁰C (-4⁰F)

60 Month Expected Life

No Maintenance

Compatible with 0-100% CO2

Breakthrough Sensor Technology

24 month life at 100%

Oxygen LevelsAccuracy < 1%

FS RangeSensitivity < 0.1%

Oxygen

No maintenance

Inherent Accuracy 0.1%

Following Calibration With 100% Oxygen

4 Standard Analysis Ranges

including 3 Suppressed Ranges 50/80/90-100%Auto Zero

Breakthrough Sensor Technology

24 month life at 100% Oxygen Levels

Accuracy < 1% FS Range

Sensitivity < 0.1% Oxygen

No maintenance

nherent Accuracy 0.1% Following

Calibration With 100% Oxygen

4 Standard Analysis Ranges including

3 Suppressed Ranges 50/80/90-100%

Auto Zero, Span Calibration

Temperature Controlled Sample System

Pressure Compensated

Remote Communication Link

Certified ISO 9001 QA System

Breakthrough Sensor Technology

24 month life at 100% Oxygen Levels

Accuracy < 1% FS Range

Sensitivity < 0.1% Oxygen

No maintenance

Inherent Accuracy 0.1% Following

Calibration With 100% Oxygen

4 Standard Analysis Ranges including

3 Suppressed Ranges 50/80/90-100%

Auto Zero, Span Calibration

Temperature Controlled Sample System

Pressure Compensated

Remote Communication Link

Certified ISO 9001 QA System

CSA and CE Approved

Pressure Compensated=No False Alarms

Advanced Sensor Technology

Accuracy < 1% FS Range

Sensitivity < 0.5% FS Range

Fast Response

Extended Operating Range

36 Month Expected Life

No Maintenance

Dual OHSA Alarms 20.0%, 19.5%

Dual Red-Green LED Alarm Indicators

LED Indicators for AC Failure, Low Batt

NEMA 4X Enclosure

Optional HI, LO Alarms

Optional Integral Pump, 4-20mA Output

Certified ISO 9001 QA System

Breakthrough Electrochemical

Oxygen Purity Sensor

Inherent Accuracy 0.1% after Calibration

24 Month Life in 100% Oxygen

Compensated for Barometric Pressure

No Maintenance

Unaffected by Vibration and Motion

Designed for Industrial Use

Intrinsically Safe Design

3 Standard Analysis Ranges

Optional High PPM Ranges Available

Auto-ranging or Manual

Stainless Steel Wetted Parts

0-1V Signal Output

Water Resistant Enclosure

Certified ISO 9001 QA System

ATEX certified O2 analyser manufactured by Advanced Instruments.

The LaserGas II Single Path (SP) monitor from NEO Monitors  is a compact, high performance gas monitor for true continuous in-situ monitoring. Based on the well-proven tuneable diode laser (TDLAS)

NEO Monitors new portable analyser is compact, lightweight, and battery powered for HF measurement on the spot (other gases such as HCl, NH3, H2S on request).

Key Features

• Gen. 3 compact LaserGas electronics
• For operation in zone 1 and class I div 1 areas
• Sub second response times
• Low power < 10 Watt
• Suitable for use in SIL 2 systems
• No interference from other gases
• Stable calibration, no zero drift
• No gas sampling: In-situ measurement

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, perating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

Close-coupled extractive design for fast response in flue gases up to 3000°F (1648°C). A thick-film, laser-trimmed combustibles detector provides ±25 ppm combustibles accuracy between 0 to 500 ppm. Recommended for applications with natural gas and light oil as fuel.

Close-coupled convective design for high particulate applications. Suitable for flue gas temperature up to 2800°F (1537°C). Completely field serviceable.

The WDG-IV series analyzers mount directly on the combustion process and are designed for direct measurement in high temperature fl ue gas applications such as fi red heaters and furnaces, but are equally at home on boilers and other lower temperature applications

Close-coupled extractive design for fast response in a wide range of flue gas applications up to 3000°f (1648°c). completely field serviceable.