Product Listings

EXTRACTIVE NET OXYGEN ANALYZER FOR USE IN A WET OR DRY GAS CEM SYSTEM OR INSTRUMENT CABINET

The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system integration.

Versatile pre-combustion or Flue Gas analyser commonly used for spot sampling gas melting tanks, mix station tuning on forehearths, furnace atmosphere control and flame treating applications.

The Thermox PACE2 400 is an easy-to-use industrial-grade combustion efficiency and environmental analyser that calculates the combustion efficiency of furnaces, boilers and other industrial combustion equipment.

The FGA II continuous emissions monitor uses Advanced Dual Sensor Technology (ADST) to measure specific flue gas components.

The LaserGas II Single Path (SP) monitor from NEO Monitors  is a compact, high performance gas monitor for true continuous in-situ monitoring. Based on the well-proven tuneable diode laser (TDLAS)

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, perating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

Close-coupled extractive design for fast response in flue gases up to 3000°F (1648°C). A thick-film, laser-trimmed combustibles detector provides ±25 ppm combustibles accuracy between 0 to 500 ppm. Recommended for applications with natural gas and light oil as fuel.

Close-coupled convective design for high particulate applications. Suitable for flue gas temperature up to 2800°F (1537°C). Completely field serviceable.

The WDG-IV series analyzers mount directly on the combustion process and are designed for direct measurement in high temperature fl ue gas applications such as fi red heaters and furnaces, but are equally at home on boilers and other lower temperature applications

Close-coupled extractive design for fast response in a wide range of flue gas applications up to 3000°f (1648°c). completely field serviceable.