Product Listings

Versatile pre-combustion or Flue Gas analyser commonly used for spot sampling gas melting tanks, mix station tuning on forehearths, furnace atmosphere control and flame treating applications.

The Thermox PACE2 400 is an easy-to-use industrial-grade combustion efficiency and environmental analyser that calculates the combustion efficiency of furnaces, boilers and other industrial combustion equipment.

The CWD 2005 is a high speed process gas analyser for monitoring and control of Calorific value, Wobbe Index and Specific gravity and as an option, the Air/Fuel ratio of process gas.

The FGA II continuous emissions monitor uses Advanced Dual Sensor Technology (ADST) to measure specific flue gas components.

Discontinuous measurement. The instrument is equipped with a process gas cooler and can have up to 8 measuring points.The components methane (CH4), carbon dioxide (CO2), oxygen (O2) and hydrogen sulfide (H2S) are analyzed in condensate free or wet gas. The gas is aspirated from the measuring points, which can be at a distance of up to 100 m. Two calibration gas inputs allow time-controlled periodic calibrations. The patented μPulse technique leads to an extended lifetime of the H2S sensor.

Discontinuous measurement.The instrument is equipped with a process gas cooler. The components methane (CH4), carbon dioxide (CO2), oxygen (O2) and hydrogen sulfide (H2S) are analyzed in condensate free or wet gas.

The LaserGas II Single Path (SP) monitor from NEO Monitors  is a compact, high performance gas monitor for true continuous in-situ monitoring. Based on the well-proven tuneable diode laser (TDLAS)

NEO Monitors new portable analyser is compact, lightweight, and battery powered for HF measurement on the spot (other gases such as HCl, NH3, H2S on request).

Key Features

• Gen. 3 compact LaserGas electronics
• For operation in zone 1 and class I div 1 areas
• Sub second response times
• Low power < 10 Watt
• Suitable for use in SIL 2 systems
• No interference from other gases
• Stable calibration, no zero drift
• No gas sampling: In-situ measurement

AMETEK's No Sample Line technology for the sulfur pit. The 881-NSL has no costly troublesome external sample line. The analyzer mounts directly on your sulfur pit lid, eliminating sample line plugging, the number one problem in Claus Plant analysis. The 881-NSL photometer combines an extraordinary long lamp life (estimated 5 years!) with many innovative features designed to minimize maintenance and increase reliability. The 881-NSL is equipped with anti-clogging blowback features. Any out-of-range condition automatically initiates air blowback to clear the sample system. This feature minimizes the chance of costly downtime by reducing sample line plugging. The analyzer continuously monitors itself for proper operation and has built-in alarm features.

The analyzer is specifically configured for monitoring stack emissions on a mass rate basis. It measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions enabling mass emission rates to be reported.

The Model 910 is a version of the Model 920 specifically configured for monitoring stack emissions on a mass rate basis. The standard configuration measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions, enabling mass emission rates to be reported.

The Model 919 is a UV-based photometric analyzer capable of measuring any one of hundreds of UV-absorbing compounds. The 919 is a complete system with a sample extraction and transport system designed to maintain sample integrity.

The Model 920 is a multi-component analyzer capable of measuring up to five different gases simultaneously. It, therefore, performs analyses typically requiring two or more separate analyzers.

The Thermox PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions. The analyzer is fed a small sample of the air/fuel mixture, burns it and then measures the net oxygen or net excess fuel content of the mixture.

The Pury 250e gas purification system dries and cleans gas in such a way that it can be processed for measurement in a CWD2000 gas calorimeter or other on-line process analyzers.

Accurate, reliable measurement of H2S and SO2 in the tail gas from a Claus sulfur recovery plant is critical. Unfortunately, tail gas analysis has historically been one of the most difficult applications because of common problems with sample line plugging due to sulfur vapors present in the sample.

AMETEK’s Western Research Model 900 Air Demand Analyzer was specifically designed for Claus processes and to meet the more demanding analytical requirements of these new processes. Used in conjunction with the ASR 900 sampling probe, which provides trouble-free sampling, the Model 900 ensures maximum data availability for optimum operation of all sulfur recovery processes. SO2.